Common Misconceptions and Avoidance methods of shoe covering machine operation

Read Time:7 Minute, 51 Second

Although the shoe covering machine is easy to operate, due to differences in design details (such as mechanical structure, shoe cover fit) and user habits, problems such as jamming, damage and machine failure often occur due to improper operation in actual use. This article sorts out six frequently occurring misunderstandings, and provides specific avoidance methods based on principles and scenarios to help users use the products efficiently and safely.

I. Misunderstandings in Choosing Shoe Covers: "Use Them Casually" Does not equal "Put them on Casually"

Common Questions

• Mixing incompatible shoe covers (such as those that are too large or too small in size, or too hard in material);

• Using low-quality recycled plastic shoe covers (thin, brittle and easy to break);

Ignore the "applicable models" marked on the shoe cover packaging (such as mixing dedicated and non-dedicated models).

Consequence

The shoe covers cannot be unfolded smoothly (stuck at the exit), the edges tear (contaminating the ground), or even break the internal spring/push rod of the machine.

Avoidance methods

1. Give priority to choosing "universal" shoe covers: Select universal shoe covers marked as "10cm×14cm standard size" and "PE/PDMS material" (compatible with over 90% of household shoe covering machines), and avoid brand-bound ones (costly and difficult to replace).

2. Check the machine labels: Refer to the shoe covering machine manual to confirm the "maximum compatible shoe size" (e.g., ≤ size 44) and the "Recommended shoe cover thickness" (suggested 0.08-0.12mm, too thick is prone to jamming).

3. Refuse inferior shoe covers: Inferior shoe covers have rough edges that are prone to puncching, and the material may contain impurities that could clog the shoe opening. It is recommended to choose basic models from reputable brands (such as Miaojie and 3M).

Ii. Misconception in Operation Techniques: "Pulling hard" Does not equal "Taking easily"

Common Questions

• Violent pulling when taking out the condom (especially when the automatic model takes a long time to release the condom);

• Pull out multiple shoe covers at once (wanting to "save time");

When pressing the manual version, excessive force is applied (exceeding the spring rebound threshold).

Consequence

The shoe covers were torn, the gears/springs inside the machine were misaligned (resulting in jamming when releasing the covers later), and the springs of the manual model were fatigued and broken.

Avoidance methods

1. Gently pull and take out: After the automatic shoe cover is taken out, hold the front end (not the edge) of the shoe cover and pull it outward at a constant speed to avoid scratching the cover opening with nails or sharp objects. For the manual version, press and wait for the spring to pop out naturally, then gently pull the top of the shoe cover.

2. Take only one at a time: The shoe covering machine is designed for "single release". Forcibly pulling multiple will only damage the internal stacking structure (the subsequent release is prone to layer stacking and jamming).

3. Pause operation in case of abnormality: If you feel excessive pulling resistance (such as a shoe cover getting stuck), stop immediately and check if there are any foreign objects (such as debris or hair) at the cover opening. Clean them up and then try again.

Iii. Misunderstandings in Cleaning and Maintenance: "No Need to Care" ≠ "Always Smooth"

Common Questions

• Long-term failure to clean out the shoe cover opening (accumulation of dust and shoe cover debris);

• Wipe the interior directly with a damp cloth (for electronic models, water ingress and short circuit);

• Ignore the dust accumulation on the bottom tray of the shoe covering machine (which breeds bacteria and affects stability).

Consequence

The exit port is blocked (no exit or stuck in half), electronic components are damaged (the automatic model malfunctions), or the machine slides or tilts over (safety hazard).

Avoidance methods

1. Clean the outlet every week: Use a dry cotton swab or soft brush to clean the outlet gap (pay special attention to cleaning the debris at the brush/rubber strip area), and avoid using alcohol or corrosive liquids (which may age the rubber parts).

2. Regularly disassemble and clean the trays: The detachable trays should be rinsed with clean water once a week (dried and then reinstalled) to prevent the accumulation of shoe cover residue or dust.

3. Moisture-proof and dust-proof for electronic models: If there are circuit boards inside the automatic model, avoid wiping them with a damp cloth. Instead, use a hair dryer on the cold air setting to blow off the dust from a distance (at a distance of ≥20cm).

Four. Safety Usage Misconceptions: "Random Placement" Does Not Equal "Safe Use"

Common Questions

• Place in a low position accessible to children (without child locks);

The uneven ground causes the machine to shake (knocked over by pets or children).

The automatic sensing area is blocked (such as with decorative stickers).

Consequence

Children may accidentally touch their hands, the machine may tip over and break (especially the wall-mounted model may cause injury), or the sensor may fail (either not working out or triggering by mistake).

Avoidance methods

1. Enable the child lock function: For families with infants and toddlers, make sure the child lock is turned on before operation (usually press and hold the power button for 3 seconds) to prevent children from accidentally touching the socket.

2. Ensure stable placement: Floor-standing models should be placed on a flat ground, and the anti-slip pad at the bottom should be in full contact with the ground. When installing the wall-mounted type, calibrate with a level and tighten the screws (for load-bearing walls, it is recommended to use expansion screws).

3. Keep the sensing area clean: For automatic sensing Windows (such as infrared/capacitive sensing areas), wipe them with a soft cloth to avoid being blocked by stickers or water stains (which may affect sensitivity).

V. Misconception in Special Scenarios: "Applicable to All" ≠ "Applicable to All"

Common Questions

• Put on wet shoes directly on rainy or snowy days (the shoe covers are prone to tearing after absorbing moisture);

• Shoe covers for high heels/Dr. Martens boots (sharp heel and worn-out shoe covers);

• Squeeze the shoe covering machine when storing (the spring fails due to long-term compression).

Consequence

Wet shoe covers breaking and contaminating the ground, sharp heels piercing the shoe covers (while also damaging the machine outlet), and the internal springs of the machine permanently deforming (unable to come out of the covers normally).

Avoidance methods

1. Wet shoes should be treated first: When guests wear wet shoes in rainy or snowy weather, first dry the soles with a dry towel (or let them dry for 5 minutes before putting on shoe covers) to prevent the moisture from making the shoe covers soft and prone to breakage.

2. Special shoe shape auxiliary fixation: When using shoe covers for high heels or Dr. Martens boots, you can fold the edge of the shoe cover 1-2cm towards the heel (to increase the wrapping), or choose "widened and thickened" special shoe covers (some brands have compatible versions).

3. Keep upright when storing: When not in use for a long time, the shoe covering machine should be placed upright (avoid inversion or squeezing), and the manual spring should be kept in its natural state (do not force pressing).

Vi. Functional Misconception: "Having disinfection = Omnipotent" ≠ "Once and for all"

Common Questions

• It is believed that the shoe covering machine with UV disinfection function can completely replace daily cleaning;

• Failure to remove shoe covers in a timely manner after disinfection (long-term exposure to ultraviolet rays accelerates the aging of shoe covers);

Ignore the applicable conditions for the drying function (such as only turning it on in humid weather).

Consequence

Disinfection is merely going through the motions (only killing surface bacteria), shoe covers become brittle due to excessive ultraviolet rays (prone to breakage), and the drying function idles, wasting energy.

Avoidance methods

Disinfection should be combined with daily cleaning: UV disinfection should be used 2-3 times a week (for 10 minutes each time). Before and after use, the debris at the sleeve mouth still needs to be cleaned out (to avoid bacterial growth in dead corners).

2. Remove the shoe covers promptly after disinfection: For the shoe covering machine with disinfection function, remove the shoe covers within 30 minutes after disinfection is completed (long-term exposure to ultraviolet rays will cause the PE material to oxidize and become brittle).

3. The drying function can be activated as needed: Only use it during the rainy season or when the shoe covers are obviously damp (15 minutes each time), otherwise the high temperature may accelerate the aging of the shoe covers.

Summary

The operational misunderstandings of the shoe covering machine mostly stem from "neglecting details" - from the selection of shoe covers to techniques, cleaning and safety, every step requires adjusting habits in accordance with the characteristics of the machine. The key is "fit + gentle + regular maintenance" : choosing the right shoe covers, operating gently, and cleaning regularly can not only extend the machine's lifespan (reduce replacement costs), but also make the shoe covering machine truly a "worry-free cleaning tool".

www.quenshoecovers.com
Zhejiang Quen Technology Co., Ltd.