Sourcing NACS DC Charging Plugs from China: A Buyer's Checklist
As the North American EV charging market develops, charging equipment manufacturers and infrastructure providers are paying closer attention to the quality and compatibility of NACS DC charging components. For companies developing DC fast chargers, the charging plug is an important part of the complete product. Its electrical performance, mechanical design, cable configuration, and compatibility with the charging standard all need to meet the requirements of the target application.
China has become an important sourcing destination for EV charging components, offering international buyers access to manufacturers with different product categories and technical configurations. However, a successful sourcing decision depends on finding a supplier that understands the product requirements and can provide clear specifications for engineering evaluation.
Zhangjiagang UCHEN New Energy Technology Co., Ltd., also known as Youcheng Technology (stock code: 873087), focuses on the development and market promotion of high-performance charging products for new energy vehicles. Through its DUOSIDA brand, the company provides charging components for different EV charging applications, including NACS DC charging plugs.
This article looks at the product features and supplier considerations that matter when sourcing NACS DC charging plugs from China.

NACS DC Charging Plugs: A Key Component in Charging Equipment
A DC charging plug connects the charging cable to the vehicle's charging inlet. It must support the required electrical current while maintaining a stable connection during charging.
For charging station manufacturers, selecting the correct plug involves several engineering considerations:
-
Compatibility with the required NACS interface
-
Rated voltage and current
-
Contact resistance and temperature rise
-
Cable conductor specifications
-
Insulation and protection performance
-
Mechanical durability during repeated use
These requirements are closely related. A connector with a suitable current rating must also have an appropriate cable configuration and electrical design. Similarly, a product intended for outdoor charging equipment needs to be evaluated against the environmental conditions in which it will operate.
DUOSIDA offers two NACS DC charging plug configurations rated at 250A and 300A, giving equipment developers options when matching connector specifications with their charging system designs.
Two NACS DC Charging Plug Options from DUOSIDA
Different charging equipment projects may have different current requirements. Providing more than one rated-current configuration allows buyers to evaluate products according to their intended application rather than selecting a connector based only on its appearance.
V2-DSN-EV-250P: 250A NACS DC Charging Plug
The DUOSIDA V2-DSN-EV-250P is designed for NACS DC charging applications with a rated current of 250A.
Its published product specifications include:
-
Rated current: 250A
-
Operating voltage: 1000V
-
Maximum contact resistance: 0.5mΩ
-
Terminal temperature rise: Less than 50K
-
Mechanical lifespan: More than 10,000 no-load insertion and withdrawal cycles
-
Operating temperature: -30°C to +50°C
-
Internal protection rating: IP67
The standard cable specification is:
4×2AWG+1×14AWG+(2×18AWG)(S)+4×18AWG
This configuration provides a reference for charging equipment manufacturers reviewing conductor sizes and cable arrangements during product development.
V2-DSN-EV-300P: 300A NACS DC Charging Plug
For projects requiring a higher rated-current configuration, DUOSIDA also offers the V2-DSN-EV-300P.
Its published specifications include:
-
Rated current: 300A
-
Operating voltage: 1000V
-
Maximum contact resistance: 0.5mΩ
-
Terminal temperature rise: Less than 50K
-
Mechanical lifespan: More than 10,000 no-load insertion and withdrawal cycles
-
Operating temperature: -30°C to +50°C
-
Internal protection rating: IP67
The standard cable specification is:
4×1AWG+1×14AWG+(2×18AWG)(S)+4×18AWG
Compared with the 250A model, the 300A version uses a different power conductor specification. This distinction is important for equipment developers because cable selection needs to match the intended electrical requirements and installation design.
Both models are listed as meeting North American Charging Standard TS-0023666 and SAE J3400 requirements. Buyers should confirm the exact product documentation and application compatibility before finalizing a project.
Product Design Details That Matter to Buyers
When evaluating a charging plug, buyers should look beyond its rated current. The materials, mechanical construction, and electrical specifications also provide useful information about product suitability.
Copper alloy contacts with silver plating
The DUOSIDA NACS DC charging plug uses copper alloy contact pins with a silver-plated surface. Contact materials and surface treatment are important considerations because the contact interface directly affects electrical connection performance.
The product specifies a maximum contact resistance of 0.5mΩ and a terminal temperature rise below 50K. These parameters provide reference points for technical comparison and product validation.
Flame-retardant housing material
The housing uses thermoplastic material with a UL94 V-0 flame-retardant grade. This specification is relevant to electrical charging equipment where material performance is part of product safety evaluation.
Mechanical durability
The product is specified for more than 10,000 no-load insertion and withdrawal cycles. It also lists resistance to a 1-meter drop and a 2-ton vehicle run-over test.
These characteristics are worth reviewing for public charging stations and commercial environments where connectors may experience frequent handling.
Electrical insulation
The published specifications include insulation resistance greater than 100MΩ under DC 1000V for one minute and a withstand voltage of 3000V AC for one minute.
For equipment manufacturers, these parameters can support preliminary technical evaluation. Final validation should follow the applicable requirements for the complete charging system.
Why Cable Configuration Should Be Confirmed Early
Cable selection is an important part of NACS charging plug procurement. It affects the connection between the plug and charging equipment, as well as installation space and cable handling.
The 250A and 300A DUOSIDA models have different standard power conductor sizes. This gives buyers a clear starting point when reviewing which model may fit their equipment design.
Before ordering, engineering teams should confirm:
-
Required rated current and voltage
-
Power conductor size
-
Signal and auxiliary wire arrangement
-
Shielding requirements
-
Cable length and routing space
-
Connection method at the charging equipment side
If a project requires a non-standard cable arrangement, buyers should provide the technical requirements to the supplier for confirmation. Any proposed configuration needs to be checked against the connector's electrical and mechanical limitations.
Confirming these details early can reduce unnecessary design changes during equipment integration.
Youcheng Technology: Supporting EV Charging Product Development
Choosing a supplier from China involves evaluating both the product and the company behind it. For charging equipment manufacturers, a supplier with a broader EV charging product portfolio can provide more options when developing different connector and charging equipment configurations.
Zhangjiagang UCHEN New Energy Technology Co., Ltd. (Youcheng Technology, stock code: 873087) is positioned as a first-class charging solution service provider in China. The company focuses on the development and market promotion of high-performance charging products for new energy vehicles.
Its DUOSIDA product portfolio covers several categories:
-
NACS charging products
-
HPC high-power charging products
-
EV charging sockets and plugs
-
Charging adapters
-
Vehicle outlet sockets
-
EV charging stations
-
Electric locks
-
High-voltage connectors
This product range serves different charging interfaces and equipment requirements. Buyers can review the relevant categories to identify components that may fit their product development or sourcing plans.
For NACS DC charging projects, the V2-DSN-EV-250P and V2-DSN-EV-300P provide two rated-current options. Their published technical specifications help equipment manufacturers begin product comparison and compatibility assessment.
More product information is available through the DUOSIDA official website.
A Practical Approach to Working with a Chinese Charging Plug Manufacturer
A good supplier relationship begins with clear technical communication. Instead of sending only a product name or a general inquiry, buyers can provide basic project information to help the manufacturer understand their requirements.
For example, an inquiry may include:
-
The required charging standard and vehicle interface.
-
The rated voltage and current of the charging system.
-
The preferred NACS plug model or cable configuration.
-
The intended charging equipment application.
-
Any specific documentation or testing requirements.
The supplier can then use these details to help confirm whether the selected product is appropriate for the project.
Before mass production, buyers should also review product drawings, request samples when necessary, and complete their own compatibility and performance validation. These steps are important for maintaining consistency between the approved sample and subsequent orders.
For international customers, clear communication about product models, specifications, inspection requirements, and delivery arrangements also helps make the sourcing process more efficient.
Conclusion
Sourcing NACS DC charging plugs from China requires attention to product specifications, supplier capabilities, and project compatibility. Rated current, cable configuration, contact materials, insulation performance, and mechanical durability all play a role in determining whether a connector is suitable for a particular charging equipment design.
DUOSIDA provides V2-DSN-EV-250P and V2-DSN-EV-300P NACS DC charging plug options, rated at 250A and 300A respectively. With published specifications covering electrical performance, cable arrangements, housing materials, and mechanical characteristics, these products offer practical options for charging equipment manufacturers to evaluate.
Backed by Youcheng Technology's focus on high-performance EV charging products and its broader product portfolio, DUOSIDA provides international buyers with additional choices when sourcing NACS charging components.
For manufacturers and infrastructure developers planning new charging equipment projects, reviewing the DUOSIDA NACS DC charging plug range is a useful starting point for technical discussions and product selection.
www.duosidaev.com
Zhangjiagang UCHEN New Energy Technology Co., Ltd.

Average Rating