Integrated Water Metering Equipment for Utility, Commercial, and Industrial Distribution

Read Time:6 Minute, 30 Second

Reliable water measurement begins with choosing equipment that matches the pipeline, flow profile, operating environment, and long-term management objectives. GUANGZHOU BASIC INTELLIGENCE TECHNOLOGY CO., LTD. supplies a coordinated range of ultrasonic, multi-jet, and Woltmann water meters for overseas utilities, engineering contractors, system integrators, and distributors seeking dependable metering products for clean water networks.

From service connections to large-diameter distribution pipelines, the portfolio combines practical mechanical designs with advanced electronic measurement and communication options. This gives buyers greater flexibility when developing municipal water supply projects, commercial facilities, industrial water systems, and remote meter reading programs.

Ultrasonic Measurement for Connected Water Networks

The large-diameter ultrasonic water meter measures flow through the time difference between upstream and downstream ultrasonic wave propagation. Its dual-channel measurement architecture is designed to support accuracy and operating stability. Redundancy allows the meter to continue measuring when one channel experiences an obstruction or abnormal condition, helping maintain data continuity in demanding installations.

The meter includes a high-definition, wide-temperature nine-digit LCD display and supports magnetic-stick menu operation. Users can review cumulative flow, instantaneous flow, fault records, meter information, communication parameters, historical monthly data, and test information. An infrared interface enables on-site reading with a compatible handheld device.

For smart utility projects, communication can be configured with M-BUS, RS485, or LoRa. A built-in 4G or NB-IoT communication module is also available for Internet of Things applications. The default power option is an internal lithium battery, with a stated service life of more than six years and an additional year under the specified operating conditions. An external DC 7.5 to 24 V supply can be specified for selected RS485 configurations.

Available options include reverse-flow counting and pipeline pressure monitoring. The ultrasonic range covers DN50 to DN300, with common Q3 flow rates from 25 m3/h for DN50 up to 1000 m3/h for DN300. Range ratios of 125, 160, 200, 250, and 400 are available according to model selection. The product documentation specifies Class 2 accuracy, IP68 protection, MAP16 pressure level, T30 temperature class, and U5/D3 upstream and downstream flow-field sensitivity.

Mechanical Choices for Proven Field Operation

For buyers who prefer robust mechanical metering, the wet-type multi-jet water meter provides a practical solution for residential, commercial, and industrial clean-water applications. Multiple water jets distribute flow across the vertical turbine, supporting stable rotor movement and improved measurement performance, particularly at lower flow rates. The wet-type mechanism is straightforward, durable, and cost-effective for conventional water supply installations.

The LXS-(15-65) series is designed for horizontal installation and includes threaded models from DN15 to DN50 and flanged models for DN50 and DN65. Depending on the configuration, the meter is suitable for cold water at T30 or T50, or hot water at T90. The stated working pressure is 1.0 MPa, with Class 2 accuracy and an R100 range ratio. Its compact format and low-maintenance design make it suitable for building water systems, local distribution lines, and replacement projects.

For larger pipelines, the detachable horizontal Woltmann dry-type water meter offers a serviceable solution across DN50 to DN300. Its dry-type measuring mechanism is isolated from the water and transfers rotor movement through magnetic coupling to the counter. This helps protect the register from direct water contact and supports clear reading. The detachable construction allows the measuring mechanism to be removed for inspection or maintenance without removing the complete pipeline body, helping reduce service disruption.

The LXLG-(50-300) series provides Q3 flow rates from 25 m3/h to 1000 m3/h, with R50 range performance, Class 2 accuracy, 1.0 MPa working pressure, and horizontal installation. Flanged connections follow the documented GB/T 17241.6 configuration, with PN10 specifications shown for the listed dimensions.

Where the application requires improved low-flow performance in a large-diameter mechanical meter, the WS detachable vertical Woltmann water meter is another option. Its vertical helix-shaped rotor and low-inlet, high-outlet arrangement are designed for full-flow detection. The built-in stainless steel filter supports stable operation in domestic water conditions, while the independently sealed counting mechanism keeps dial readings isolated from water quality. The metering mechanism can be removed for maintenance without dismantling the complete unit.

The WS-(50-200) series covers DN50 to DN200 and offers an R200 range ratio. It is available for cold water and selected hot-water applications, with working pressure options of 1.0 MPa or 1.6 MPa according to configuration. The product documentation specifies Class 2 accuracy, U10/D5 flow-field sensitivity, and a detachable design suited to projects where maintenance access and reduced downtime are important.

Installation Guidance for Consistent Results

Water meter performance depends on the complete hydraulic installation, not only the meter itself. Before installation, pipelines should be flushed to remove stones, sand, rust, and other debris. Upstream and downstream pipes should be properly supported so that the meter does not carry excessive mechanical stress. The flow direction must match the arrow on the meter body, and the selected meter diameter should correspond with the connected pipeline.

For the mechanical meter series, the documentation recommends avoiding direct connection between the inlet valve and meter. A filter and an upstream straight pipe section greater than ten times the meter diameter are recommended, together with a downstream straight section greater than five times the meter diameter. Ultrasonic installations require careful attention to air, turbulence, pump pulsation, elbows, valves, and other sources of disturbed flow. The pipe should remain full of water during measurement, and the meter should be installed in the orientation specified for the selected model.

These installation requirements are especially relevant for overseas distributors and project contractors. Correct selection, pipe preparation, support, valve spacing, commissioning, and periodic verification help reduce field complaints and protect the expected service life of the equipment.

Engineering Experience for International Supply

Since 1998, GUANGZHOU BASIC INTELLIGENCE TECHNOLOGY CO., LTD. has focused on smart utility technologies and metering equipment. The company reports more than 80 patents and software copyrights and has participated in drafting national and international metrological standards. Its stated qualifications and recognitions include the Guangdong Provincial Engineering Technology Research Center for Cooling and Heat Measurement Energy Conservation, EU MID certification, and the Guangdong Provincial Famous Brand Product title.

Beyond water meters, the company develops 4G water meter camera modules, 4G gas meter camera modules, high-precision heat meters, flow meters, and integrated management systems for smart water, smart gas, building energy management, and smart heating. This broader technical scope allows buyers to source individual meters, communication components, or coordinated metering solutions from one experienced supplier.

Applications Across Utility and Infrastructure Projects

The product range is suitable for municipal water distribution, district supply networks, commercial buildings, residential developments, industrial clean-water systems, irrigation support infrastructure, water resource management, and utility modernization programs. Ultrasonic meters are well suited to data-driven projects requiring communication and remote reading. Multi-jet meters address compact conventional installations. Horizontal and vertical Woltmann meters support larger pipelines where durable mechanical measurement and serviceability are priorities.

For distributors, the range creates a practical product structure covering different nominal diameters, flow conditions, installation formats, and communication requirements. For engineering companies, it provides options for matching the meter technology to hydraulic conditions instead of forcing one design across every project.

Discuss Your Water Metering Requirement

Contact GUANGZHOU BASIC INTELLIGENCE TECHNOLOGY CO., LTD. for model selection, technical documentation, communication configuration, and project-based supply discussions. Please provide the nominal diameter, expected flow range, water temperature, working pressure, connection requirements, installation conditions, and preferred communication method so the appropriate meter can be evaluated.

Contact: SARA HUANG | Phone: 18011862120 | WhatsApp: 18011862120 | Email: SARA.HUANG@BASIC.COM.CN

Headquarters: Room 611, NO.101 Kexue Avenue, Huangpu District, Guangzhou, P.R.C | Fax: 020-80672831 | Website: www.basic-meter.com

Happy
Happy
0 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %

Average Rating

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Leave a Reply

Your email address will not be published. Required fields are marked *

6bbdbc930c4b75137ce79072efbaa0b1
Previous post Top Industries Using MIL-DTL-38999 Series I Connectors Today
1d15106c4de8e79ec98826db5e3ce491
Next post Raystar Cropprotection Celebrates Successful Showing at Henty Machinery Field Days