Stamping Parts Manufacturers for New Energy Light Trucks
As new energy light truck platforms continue to scale, sourcing teams face a recurring challenge: finding a stamping and forging partner capable of delivering structural components in precise material grades such as 20CrMnTi and 40Cr, while meeting international automotive quality standards. Fujian Guanwei Auto Parts Co., Ltd., operating under the GW JDM / Guanwei Auto Parts brand, addresses this need through a full-chain approach to differential parts, pin shaft parts, stamping parts, and forged parts, with a dedicated JDM division focused on high-end precision parts for new energy vehicles.
Why Material Selection Matters for New Energy Light Truck Stamped Parts
New energy light truck axles and chassis systems place unique demands on stamped and forged structural components. Brackets, supports, cover plates, and spring plates must withstand repeated mechanical loading while remaining lightweight enough to support electric drive axle efficiency. Material choice directly determines whether a component can meet these competing requirements. Guanwei's engineering approach centers on matching material grade to functional load: 20CrMnTi is applied where high-strength, wear-resistant performance is required near motor axles, while 40Cr is selected for components such as spring plates and gearbox covers that require a balance of strength and machinability.
Guanwei's New Energy Light Truck Stamped and Forged Parts Portfolio
Guanwei's product line for new energy light trucks includes a defined family of stamped and forged structural parts addressing multiple axle and engine mounting points on 3.5-ton new energy light trucks. This family includes:
- A support plate (HD90009321405/04), applicable to the HDZ255 single-stage reduction drive axle, sized 9Tφ22/28T14T*49.8, manufactured in 20CrMnTi and primarily used on 3.5-ton motor axles.
- A support bracket, sharing the same part numbers, axle application, and material, also primarily used on 3.5-ton motor axles.
- A spring plate / spring pressure plate, offered in two configurations: A629200000105 at size φ30138186 in 40Cr, and HD90009321405/04 at size 9Tφ22/28T14T*49.8 in 20CrMnTi.
- A shock absorber bracket assembly (right side), part number A629200000105, sized φ30138186, manufactured in 40Cr.
- A fixed support, part number HD90009321405/04, manufactured in 20CrMnTi, primarily used on motor axles of 3.5 tons.
- An engine gearbox cover, part number A629200000105, sized φ30138186, manufactured in 40Cr.
These parts are produced through stamping, forging, and CNC machining, and are developed for OEM supply to new energy light truck and electric drive axle programs.
Manufacturing Capabilities Behind the Material Options
Guanwei's ability to deliver consistent 20CrMnTi and 40Cr components stems from an integrated technology platform combining CAD/CAM/CAE tools, including UGII, CATIA-5, and Pro/E, with independent product design, tooling design, reverse analysis, and hot runner analysis capability. As of 2025, the company has applied for 8 invention patents and 36 utility model patents. Product development cycles are controlled within 90 to 150 days after project approval, a benchmark that applies across the company's stamping, forging, and machining operations.
Process control is reinforced through CQI-9 heat treatment management and CQI-12 surface treatment management, ensuring that material properties such as hardness and wear resistance in 20CrMnTi and 40Cr parts are consistently achieved batch after batch. The company also operates a Pan-micro digital operations platform, CAXA PLM, an industry-customized ERP system, and an MES industrial IoT platform, supporting full-process product traceability from raw material intake through finished part shipment.
Quality and Compliance Assurance
For sourcing teams evaluating stamping parts manufacturers for new energy light trucks, compliance coverage is a critical screening factor. Guanwei maintains IATF 16949:2016, ISO9001, ISO14001, and ISO45001 certifications, alongside CE and RoHS compliance. The company passed ISO9001, ISO14001, and ISO45001 triple-system certification in 2025, following TS16949 quality management system certification in 2020. It has also been recognized as a National High-Tech Enterprise, a Fujian Province Innovative SME, and a Fujian Province Technology-based SME.
Material traceability extends into sustainability as well. Guanwei sources SCS/Kingfisher certified steel containing a minimum of 11% recycled steel content, under SCS Kingfisher certification SCS-RC-07977, valid from June 13, 2025 to June 12, 2026, covering Angang Steel Co., Ltd. products. The company's 1,500 kW solar installation and photovoltaic power station reduce carbon dioxide emissions by approximately 1,626.5 tons per year, while saving approximately 460 tons of standard coal and approximately 322 tons of oil annually. These green manufacturing measures support customers seeking to document supply chain environmental performance alongside material-grade compliance.
Customer Validation: Hande Axle
Guanwei's new energy light truck stamped and forged parts have been developed in direct collaboration with Hande Axle, a joint venture established in 2003 by Weichai Power and Shaanxi Heavy Duty Truck Group, operating four production bases with an annual capacity of 1.5 million axle assemblies. The collaboration covers the full stamped and forged part family built around part numbers HD90009321405/04 and A629200000105, supporting 3.5-ton new energy light truck development on the HDZ255 single-stage reduction drive axle. This relationship illustrates Guanwei's capacity to support OEM axle manufacturers through the component design, material selection, and production stages required for new energy vehicle programs.
Manufacturing Scale and Global Reach
Guanwei operates from more than 40,000 square meters of standardized factory space in Nan'an, Quanzhou, Fujian, supported by 400+ high-end equipment units and a workforce of 200 skilled production personnel and 40 professional management staff. The company serves 89+ cooperative customers across 50 countries, offering over 2,000 product categories spanning differential parts, pin shaft parts, stamping parts, and forged parts. Roughly half of production is exported to Southeast Asia, South America, North America, and the Middle East, with the remainder sold domestically.
Conclusion
For buyers evaluating stamping parts manufacturers for new energy light trucks that can supply components in both 20CrMnTi and 40Cr material options, Fujian Guanwei Auto Parts Co., Ltd. offers a documented combination of engineering capability, quality certification, green manufacturing practice, and direct OEM collaboration history. Operating under the philosophy "Compliance as the Foundation, Green as the Wing, Innovation as the Soul," and the slogan "Champion quality, Craftsman thinking," the GW JDM / Guanwei Auto Parts brand continues to develop its stamped and forged part portfolio for the evolving new energy commercial vehicle sector.

https://www.gwjdm.com/
Fujian Guanwei Auto Parts Co., Ltd.
Average Rating